Hobby-Lobby
1/10 EXO TERRA BUGGY 4WD RTR
| Wheelbase | 334mm (13.15") |
| Width | 295.3mm (11.6") |
| Height | 228.6mm (9") |
| Ground Clearance | 50mm (2") |
| Weight (no electronics) | 2.25kg (4.95 lbs) |
| Motor | Vanguard 2900Kv Brushless Motor Developed by Castle |
Technical Specifications:,
1/10 EXO Terra Buggy 4WD RTR SCALE REALISM AND HIGH ...Hobby-Lobby
PHOENIX ICE2 HV 80 ESC
| Technical Specifications | PHOENIX ICE2 HV 80 Specs |
| Width | 1.9" (50mm) |
| Height | 0.9" (23.2mm) |
| Weight | 2.3 oz* (67.8g*) |
| Max amps | 80 amps** |
| Max volts | 50 volts,12s LiPo,36 cells NiCad/NiMh |
* Weight without wires, **Ratings determined with a 5mph airflow on the ESC., ,
Technical Specifications: PHOENIX ICE2 HV 80 Specs: Length: 2.9" (74.5mm) ...Hobby-Lobby
PHOENIX ICE2 HV 60 ESC
| Technical Specifications | PHOENIX ICE2 HV 60 Specs |
| Width | 1.9" (50mm) |
| Height | 0.9" (23.2mm) |
| Weight | 2.4 oz* (68.9g*) |
| Max amps | 60 amps** |
| Max volts | 50 volts,12s LiPo,36 cells NiCad/NiMh |
* Weight without wires, **Ratings determined with a 5mph airflow on the ESC., ,
Technical Specifications: PHOENIX ICE2 HV 60 Specs: Length: 2.9" (74.5mm) ...Hobby-Lobby
PHOENIX ICE2 HV 40 ESC
| Technical Specifications | PHOENIX ICE2 HV 40 ESC Specs |
| Width | 1.75" (44.6mm) |
| Height | 0.84" (21.4mm) |
| Weight | 1.44 oz* (41g*) |
| Max amps | 40 amps** |
| Max volts | 50 volts,12s LiPo,36 cells NiCad/NiMh |
,
Technical Specifications: PHOENIX ICE2 HV 40 ESC Specs: Length: 1.8" ...Hobby-Lobby
PHOENIX ICE2 HV 160 ESC
| Technical Specifications | PHOENIX ICE2 HV 160 Specs |
| Width | 2.04" (52mm) |
| Height | 1.2" (30.6mm) |
| Weight | 4.56 oz* (129.4g*) |
| Max amps | 160 amps** |
| Max volts | 50 volts,12s LiPo,36 cells NiCad/NiMh |
,
Technical Specifications: PHOENIX ICE2 HV 160 Specs: Length: 3.94" (100mm) ...Hobby-Lobby
PHOENIX ICE LITE 200 BRUSHLESS ESC (6S)
| Technical Specifications | Phoenix ICE LITE 200 Brushless ESC (6S) Specs |
| Input Voltage | 25V Max (6S LiPo or 20 cells NiCd/NiMH) |
| Input Connector Types | No connector - user must solder own connector to leads |
| Output Connector Types | No connector - user must solder own connector to leads |
| Length | 4.0 in (102mm) |
| Width | 1.4 in (35mm) |
| Height | 0.8 in (21mm) |
| Weight | 5.2 oz (147g) |
| BEC Voltage | 5.0V default. Can be programmed from 5.0V to 7.0V in 0.1V increments |
| Wire Gauge | Motor Wire |
,
Technical Specifications: Phoenix ICE LITE 200 Brushless ESC (6S) Specs: ...Hobby-Lobby
TRAXXAS XO-1 READY-TO-RACE SUPERCAR
Technical Specifications:, XO-1 QUICK FEATURES:, 100+mph Out of the box!*,
The World's Fastest Ready-To-Run Supercar -- 0 to 100mph in ...Hobby-Lobby
CASTLE BEC PRO V2
| Length | 1.69 in (43mm) |
| Width | 1.3 in (33mm) |
| Height | .94 in (24mm) |
| Weight | 1 oz (29 grams) without wires |
Castle BEC PRO V2 Highlights:, Rated for up to 12S input (50.4 volts),
A high-output switching BEC The Castle PRO BEC is intended ...Hobby-Lobby
CASTLE LINK PROGRAMMER
Why hassle with transmitter stick programming when you can plug your brushless controller into the Castle Link Windows compatible programming adapter and the USB port on your PC? This makes your speed controller even better by allowing: Set up of programmable options with point and click ease. View your current Phoenix program settings. Customize values for low-voltage cutoff, prop brake strength and governor mode gain. Download new software updates via the internet as they become available. New revised interface featuring: All-in-one support for Phoenix, Mamba, Barracuda, Phoenix HV, and Thunderbird brushless controllers. Saved settings files. New "check for updates" feature. Totally automatic install. Expanded programming and parameters for all Castle car controllers.,
If "stick" programming your Castle brushless controller is getting old, ...Hobby-Lobby
CASTLE LINK QUICK CONNECT
,
Castle Link Quick Connect Experienced modelers go to great pains ...Hobby-Lobby
P-40 WARHAWK 300 ARF
A thrilling re-creation of the Flying Tigers' legendary fighter On paper, the P-40 was outclassed by many of the foes it faced. But in the hands of the pilots of the American Volunteer Group, the Warhawk was used to deadly effect against "superior" Zeros. Their exploits made the iconic shark-toothed grin of the "Flying Tigers" a symbol of victory for the Allies and cause for concern to any enemy pilot that encountered it. E-flite has captured the spirit of the Flying Tigers in this fun-to-fly re-creation of the P-40 that goes together fast and is small enough to fly in the park. It comes out of the box loaded with scale details like an authentic Flying Tigers paint scheme and molded panel lines. It also comes equipped with a factory-installed 300 BL outrunner motor that will provide plenty of power for warbird aerobatics like loops, rolls and Immelmans. Its simple 3-channel control setup means you only need to buy two servos, one for aileron and one for elevator, making it even more affordable to get flying. When you're not flying, you can show off its scale looks with the included static display stand. P-40 Warhawk 300 ARF Highlights: Molded foam construction with panel lines and other scale details Factory-applied Flying Tigers "shark mouth" paint scheme Factory-installed 300 BL outrunner motor with propeller Factory-installed empennage, control horns and servo links Simple aileron/elevator controls require just two servos Quick release wing attachment Magnetically secured canopy hatch Extra prop and spinner included Quick, easy assembly Attractive display stand included P-40 Warhawk Specs: Wingspan: 25.6 in. (650mm) Length: 21.7 in. (550mm) Wing Area: 108 sq in. (7.02 sq dm) Radio: 4+ channels Servos: E-flite S-60 Speed Control: 10-amp brushless Recommended Battery: 2S LiPo Needed to Complete: 4-channel transmitter, receiver, 2 servos, ESC, battery and charger. Technical Specifications: Length: 21.7" Wingspan: 25.6" Flying Weight: 7 oz. Controls: Aile,
A thrilling re-creation of the Flying Tigers' legendary fighter On ...Hobby-Lobby
P-40 WARHAWK 300 ARF
A thrilling re-creation of the Flying Tigers' legendary fighter On paper, the P-40 was outclassed by many of the foes it faced. But in the hands of the pilots of the American Volunteer Group, the Warhawk was used to deadly effect against "superior" Zeros. Their exploits made the iconic shark-toothed grin of the "Flying Tigers" a symbol of victory for the Allies and cause for concern to any enemy pilot that encountered it. E-flite has captured the spirit of the Flying Tigers in this fun-to-fly re-creation of the P-40 that goes together fast and is small enough to fly in the park. It comes out of the box loaded with scale details like an authentic Flying Tigers paint scheme and molded panel lines. It also comes equipped with a factory-installed 300 BL outrunner motor that will provide plenty of power for warbird aerobatics like loops, rolls and Immelmans. Its simple 3-channel control setup means you only need to buy two servos, one for aileron and one for elevator, making it even more affordable to get flying. When you're not flying, you can show off its scale looks with the included static display stand. P-40 Warhawk 300 ARF Highlights: Molded foam construction with panel lines and other scale details Factory-applied Flying Tigers "shark mouth" paint scheme Factory-installed 300 BL outrunner motor with propeller Factory-installed empennage, control horns and servo links Simple aileron/elevator controls require just two servos Quick release wing attachment Magnetically secured canopy hatch Extra prop and spinner included Quick, easy assembly Attractive display stand included P-40 Warhawk Specs: Wingspan: 25.6 in. (650mm) Length: 21.7 in. (550mm) Wing Area: 108 sq in. (7.02 sq dm) Radio: 4+ channels Servos: E-flite S-60 Speed Control: 10-amp brushless Recommended Battery: 2S LiPo Needed to Complete: 4-channel transmitter, receiver, 2 servos, ESC, battery and charger. Technical Specifications: Length: 21.7" Wingspan: 25.6" Flying Weight: 7 oz. Controls: Aile,
A thrilling re-creation of the Flying Tigers' legendary fighter On ...